Control Arms
Shop ATV/UTV control arms commonly referred to as A-arms, including upper and lower arms and radius bars, with options from High Lifter.
Fits: Polaris RZR Turbo S, S 4, XP Models (See Fitment Below).
Fits: Polaris RZR Turbo S, S 4, XP Models (See Fitment Below).
Fits: Polaris RZR Turbo S, S 4, XP Models (See Fitment Below).
Fits: Polaris General 1000 XP and RZR TURBO XP Models (See Fitment Below).
- For 10mm hardware you will use a 15mm socket.
- For 12mm hardware you will use an 18mm socket.
- This kit does not fit units that have 12mm factory bolts!.
- See Fitment Below
Note: Be sure to check for worn bearings, bushings, etc. before installation and replace them if needed. (See Fitment Below)
Note: Be sure to check for worn bearings, bushings, etc. before installation and replace them if needed. (See Fitment Below)
Note: Be sure to check for worn bearings, bushings, etc. before installation and replace them if needed. (See Fitment Below)
Note: Be sure to check for worn bearings, bushings, etc. before installation and replace them if needed. (See Fitment Below)
For 12mm hardware you will use an 18mm socket. This kit does not fit units that have 12mm factory bolts! (See Fitment Below).
For 12mm hardware you will use an 18mm socket. This kit does not fit units that have 12mm factory bolts! (See Fitment Below).
For 12mm hardware you will use an 18mm socket. This kit does not fit units that have 12mm factory bolts! (See Fitment Below).