Polaris Control Arms
Shop Polaris Control Arms built for strength, suspension travel, and reliable fitment in demanding off-road conditions.
Polaris Sportsman, Scrambler Front Lower Control Arms
Note: If your machine is a 2019 or newer, you will need to purchase the prior style brushing (2013-2018) from a Polaris dealer. (See Fitment Below).
Polaris Sportsman 400,450,500,570,600,700,800, Hawkeye 400 Front Forward Lower Control Arms
Note: Be sure to check for worn ball joints, bearings, and bushings before installation and replace if needed.
Note: If you have a 2017 or newer Polaris Sportsman 450 or 570Â you must purchase quantity 2 (one per side) of HLA-P800-F.
Polaris Scrambler, Sportsman Rear Raked Upper & Lower Control Arm
If your machine is a 2019 or newer, you will need to purchase the prior style brushing (2010-2023) from a Polaris dealer (See Fitment Below).
Polaris RZR XP 1000 APEXX Lower Arched Radius Bar Kit (Spherical Bearing)
Fits: Polaris RZR 1000 XP, RS1, Turbo XP Models (See Fitment Below).
Polaris RZR XP 1000 APEXX Front Forward Upper & Lower Control Arms
Fits: Polaris RZR 1000 XP and Turbo Models (See Fitment Below).
Polaris RZR XP 1000 (17-23) Front Forward Upper & Lower Control Arms
Polaris RZR Turbo S APEXX Front Forward Control Arms
Fits: Polaris RZR Turbo S, S 4 Models (See Fitment Below).
Polaris RZR Turbo S 1000 APEXX Lower Radius Bar (Spherical Bearings Installed)
Fits: Polaris RZR Turbo S, S 4, XP Models (See Fitment Below).
Polaris RZR Turbo & General 1000 XP APEXX Adjustable Tie Rod
Fits: Polaris General 1000 XP and RZR TURBO XP Models (See Fitment Below).
Polaris RZR PRO XP APEXX Upper Radius Bar (Spherical Bearings Installed)
- For 10mm hardware you will use a 15mm socket.
- For 12mm hardware you will use an 18mm socket.
- This kit does not fit units that have 12mm factory bolts!.
- See Fitment Below
Polaris RZR PRO XP APEXX Trailing Arm Kit (Spherical Bearings Installed)
Note: Be sure to check for worn bearings, bushings, etc. before installation and replace them if needed. (See Fitment Below)
Polaris RZR PRO XP APEXX Lower Arched Radius Bar (Spherical Bearings Installed)
For 12mm hardware you will use an 18mm socket. This kit does not fit units that have 12mm factory bolts! (See Fitment Below).