Polaris RZR XP 1000 2017 Front Lower Control Arms
Fits: Polaris RZR 1000, Turbo (ALL Models) (17-18)
The Max Clearance Front Lower Control Arms feature a dual bend design giving you the MOST clearance you can get from the frame to the hub without adding a lift. Our a-arms provide more than 2" of additional clearance where you need it the most. We designed the Control Arm Kit specifically for RZR owners who are concerned about the additional wear and tear on a UTV when adding a standard lift kit. By maintain factory drivelines and positions, theres no added wear and tear on your Ranger's components including the CV axle joints.
The a-arms are crafted from 1 1/16" x .120 wall steel DOM tubing a serious upgrade from factory materials. Each a-arm features additional gussets adding even more strength where you need it most. Additionally, the a-arms can reuse your factory ball joints and bushings.
- If you are running stock/OEM Polaris RZR wheels or any aftermarket wheels with a 6+1 or 5+2 offset they WILL rub the rear bar on this control arm kit. Paint WILL come off of the wheels and control arms at the contact points. The rubbing is due to the narrow offset.
- A minimum of a 1" wheel spacer is required when running ANY of the wheels or wheel offsets listed above with this control arms kit. See part # WT4/15612-1 or WT4/15612-15 depending on the width you choose.